| S.NO | CORRESPONDING INSTRUMENTS TO BE USE: | Cat. No. |
|---|---|---|
| 1 | Drill Bit S.S. Quick Coupling end Dia. 4.3mm x 221mm Long Calibrated | 260.430 |
| 2 | LCP Drill Sleeve 5.0mm For Drill Bit 4.3mm | 803.110 |
| 3 | Tap for 5.0mm Locking Head Screws | 803.112 |
| 4 | Hexagonal Screw Driver with Self Holding Forceps (for 5.0mm Locking Head & 5.0mm Locking Cancellous Screws) |
301.029 |
| 5 | Q.C. Torque Screw Driver Handle 3.5mm Tip (Torque 4.0Nm) | 804.164 |
| 6 | Hexagonal Screw Driver Q.C end Shaft – 3.5mm Tip (for Torque Handle 4.0Nm) | 804.170 |
Description
| Cat No. | Length | Cat No. |
| Stainless Steel | Titanium | |
| 106.314 | 14 MM | Ti.106.314 |
| 106.316 | 16 MM | Ti.106.316 |
| 106.318 | 18 MM | Ti.106.318 |
| 106.320 | 20 MM | Ti.106.320 |
| 106.322 | 22 MM | Ti.106.322 |
| 106.324 | 24 MM | Ti.106.324 |
| 106.326 | 26 MM | Ti.106.326 |
| 106.328 | 28 MM | Ti.106.328 |
| 106.330 | 30 MM | Ti.106.330 |
| 106.332 | 32 MM | Ti.106.332 |
| 106.334 | 34 MM | Ti.106.334 |
| 106.336 | 36 MM | Ti.106.336 |
| 106.338 | 38 MM | Ti.106.338 |
| 106.340 | 40 MM | Ti.106.340 |
| 106.342 | 42 MM | Ti.106.342 |
| 106.344 | 44 MM | Ti.106.344 |
| 106.346 | 46 MM | Ti.106.346 |
| 106.348 | 48 MM | Ti.106.348 |
| 106.350 | 50 MM | Ti.106.350 |
| 106.355 | 55 MM | Ti.106.355 |
| 106.360 | 60 MM | Ti.106.360 |
| 106.365 | 65 MM | Ti.106.365 |
| 106.370 | 70 MM | Ti.106.370 |
| 106.375 | 75 MM | Ti.106.375 |
| 106.380 | 80 MM | Ti.106.380 |
| 106.385 | 85 MM | Ti.106.385 |
| 106.390 | 90 MM | Ti.106.390 |
