Description

Cat No. IS.102 Instrument Set Graphic Box Units
185.127 Kirschner Wire with Trocar Tip Dia. 1.2mm, Length 150mm 3
185.146 Kirschner Wire with Trocar Tip Dia. 1.6mm, Length 150mm 3
260.210 Drill Bit – S.S. – Quick Coupling End Dia. 2.0mm X 140mm Long 1
260.250 Drill Bit – S.S. – Quick Coupling End Dia. 2.5mm X 115mm Long 1
260.281 Drill Bit – S.S. Quick Coupling End Dia. 2.8mm x 180mm Long – Calibrated 1
264.025 Bone Tap – Quick Coupling End Dia. 3.5mm,  Thread   Length 50mm, Total Length 110mm 1
301.025 Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip 1
303.010 Small Depth Gauge 1
XP.306.010 Quick Coupling Handle T-Type 1
307.060 Drill & Tap Sleeve Combined – 2.5/3.5mm 1
340.020 Self Centering Bone Holding Forceps 190mm 2
341.030 Reduction forceps – Serrated Speed Lock – 170mm 1
342.020 Reduction Forceps – Pointed Ratchet Lock – 170mm 1
379.015 Hohmann Retractor 8mm Wide, Short Narrow Point, 160mm Length 1
382.006 Periosteal Elevator – Curved 6mm 1
382.010 Periosteal Elevator – Curved 10mm 1
803.120 LCP Bending Iron for Re-Construction Plate (Use in Pairs) for 3.5 & 4.5 LCP Plate 1
804.105 LCP Universal Drill Guide 3.5mm 1
804.110 LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm 2
804.115 LCP Centering Sleeve for K. Wire 1.6mm 1
804.120 LCP Drill Sleeve 2.7mm for 2.0mm Drill Bit 2
804.155 Centering Sleeve for K.Wire 1.25mm 1
304.010 Small Neutral & Loaded Drill Guide 1
804.162 Q.C. Torque Screw Driver Handle – 2.0mm Tip (Torque 0.8Nm) 1
804.166 Hexagonal Screw Driver Q.C.End Shaft – 2.0mm Tip (for Torque Handle 0.8Nm) 1
804.163 Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) 1
804.168 Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip (for Torque Handle 1.5Nm) 1
400.076 Graphic Box for Small Fragment Locking System 1